LED S4 Series 2 profile & Gel picker, best profile/lamp setting?

Hi All,

Is there a specific LED S4 Series 2 profile & Lamp setting that works best with the Gel colour picker?
I've got one on demo (we have a couple of LED S4 series 1), trying out the Cyc adapter.
I've got the Lamp set to HSIC (7 channels) and the colour matching using the series 2 HSIC profile is a bit off, especially around the greens, when trying to match Lee colours.
i.e. Lee 139 primary green isn't close at all (looks yellow)

I can match the colours by eye, but of course need another light focused to the same place, and the same colour gel...
It'd be nice to know that the matching will give the desired result, especially as we move away from gel!

We have a Cobalt 20, with 7.1 software installed ( not the most recent version 7.11 which says better calibration for Series 2...) but the question is still valid; is there a best combination of profile & lamp setting for Gel matching?

Parents

0 sclausen over 9 years ago

Hi Ric -

Try with Direct mode as this mode includes color calibration data in the library.

Thanks!

Sarah
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Richard over 9 years ago in reply to sclausen

You will want to update your library to at least 10.6.0, as the Source Four LED Series 2 Lustr calibration data in 10.5.3 and older libraries is noticeably off.

You can install the 10.6.0 library onto Cobalt 7.1.0. (But not older versions!)
- Do remember that updating to 7.1.1 will roll the library back to the 10.5.3 that ships with Cobalt 7.1.1
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Ric over 9 years ago in reply to Richard

Thansk Sarah & Richard.

Just checking that I use the library file that's at http://www.etcconnect.com/Products/Consoles/Cobalt-Family/Cobalt-20/Software.aspx

Cobalt v7.1.1 Library Update 10.6.0

Is there a release note for library updates? it'd be a great resource to know what's been changed/added/ improved in each version.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Richard over 9 years ago in reply to Ric

At present we don't have a release note as such, just the list of library contents which is automatically installed on Nomad systems by the library update.

I have just realised that we didn't include that as a separate download on the Cobalt pages, for the time being it can be downloaded from here: Cobalt_Library_Contents_10_6_0.zip
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Richard over 9 years ago in reply to Ric

At present we don't have a release note as such, just the list of library contents which is automatically installed on Nomad systems by the library update.

I have just realised that we didn't include that as a separate download on the Cobalt pages, for the time being it can be downloaded from here: Cobalt_Library_Contents_10_6_0.zip
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data