Hi folks,
I'm working offline with a Cobalt 20 today building new color palettes, and something odd started happening and went away on its own. No idea how I got there; if anyone's seen similar behavior please let me know. To clarify: working in online mode, but not physically plugged into the network. Working Live, recording to Direct Selects.
Homing attributes started doing this weird thing where I'd hit [HOME] & [COLOR] (or [HOME] & [ATTRIB] or 0 [COLOR]), and there was a delay before homing. The hourglass would pop up a few seconds after completing the command, I'd hear the click a few seconds later, the hourglass would reappear a second time, and finally actual homing would happen, probably about 15-18 seconds after beginning the process. It happened also with beam attributes, so it wasn't color-specific; and it resolved itself somehow.
No particular timing info was being applied to the fixture itself, and I didn't change any settings in between normal operation and the error.
Cobalt 20
Cobalt version 7.1.1.9.0.35