• State Verified Answer
  • Date
    HnkOS
  • Date
  • Replies 2 replies
  • Subscribers 56 subscribers
  • Views 2629 views
  • Users 0 members are here

Master link in sequence

Hi, One question: I connected master 1 with Chase in sequence 1 step. When I reach that step master 1 si activated with Chase, but when I go to next step Chase Continues and I need manually to turn it off. Is there a way that chase shuts down when I go to next step? Thanks in advance
Parents
  • 0
    Just create another Master Link with the master level at 0. This will take the master down.

    Easiest is to run your Main Playback sequence (GO, GO, GO) until the place the chase should stop and use [Insert] & [Master_Key].

    When you use [Insert] & [Master_Key] with the master at 0%, the link will set it to full.
    If the Master is up, the link will set the Master to zero.
Reply
  • 0
    Just create another Master Link with the master level at 0. This will take the master down.

    Easiest is to run your Main Playback sequence (GO, GO, GO) until the place the chase should stop and use [Insert] & [Master_Key].

    When you use [Insert] & [Master_Key] with the master at 0%, the link will set it to full.
    If the Master is up, the link will set the Master to zero.
Children
Related

www.etcconnect.com