effect Playbacks remember incorrect settings.

Hello.

 

I am using Congo Senior 2008 with cobolt 7.3.1

 

I have problem with efffect playbacks.  Sometimes when i am using cobalt, playbacks changes

chases by itself.  I don't know why.

Today i have happened twice during 2 our of rehersal..  It is very frustrating.

 

I noticed this issue allready on a Congo Junior (2008-2009) with cobolt ver 7.2. one year ago. 

 

Every time after restarting the desk, all my playbacks have incorrect settings. both chases and Rate values.

 

Please Help.

Parents
  • Hi Qualmos,

    could you please check in Browser->General Settings->Play Settings->Masters

    if the Setting "Auto-Update Master Page" is enabled?

    This will allow the playback Information on Masters

    to be saved there to the Show.

    You may also Need to check

    in the tab "Effects" that Effect Parameters is enabled:

    I hope that helps.

    thanks!

  • Hello..

    Thanks for answering.

    Those settings where allready set. They matched with your suggestions.

    Just to be clear. I am not talking about masters. I have trouble with effect playbacks.


    Thanks / Fredrik
  • The [Setup] > "Effects" > "Remember Effect Parameters" option is the important one.
    With this ON, the Effects will have the same parameter values when the show is loaded as they had when the show was saved.
    - This is not necessarily their HOME position (probably isn't)

    Effect Playbacks are just like moving lights.

    If you Record their values into a Preset or Cue they will change to those values when you play back the Preset or Cue.

    Also, just like with moving lights, [HOME]ing the Effect Playbacks will also put them back to their Home position.

    The default Home may not be what you want, so you can re-record the Effect Playback HOME values:

    • Set them as required
    • Select all the Effect Playbacks
    • [Record] & [Home]
Reply
  • The [Setup] > "Effects" > "Remember Effect Parameters" option is the important one.
    With this ON, the Effects will have the same parameter values when the show is loaded as they had when the show was saved.
    - This is not necessarily their HOME position (probably isn't)

    Effect Playbacks are just like moving lights.

    If you Record their values into a Preset or Cue they will change to those values when you play back the Preset or Cue.

    Also, just like with moving lights, [HOME]ing the Effect Playbacks will also put them back to their Home position.

    The default Home may not be what you want, so you can re-record the Effect Playback HOME values:

    • Set them as required
    • Select all the Effect Playbacks
    • [Record] & [Home]
Children
No Data
Related