Cobalt V8.0 - Screen layout not recorded properly

Are there specific tabs that are missing? Or just random?

I have made some tests. It works well if the tabs are locked before recording screen layout. Before that it was the Device controls tabs and or Masters view that are vanished from record.
Thanks
Matt

Thanks for the feedback.

We have not encountered this here. Could you give us some more details and send your show file?

Hi,

Thanks for the answer. As I said, I've made some tests ans everything is ok only if I lock the tabs before recording a screen layout. I didn't test every tabs, but for me it occurs with the Masters View tab and the Device Controls tab. It's ok like this, but anyway it's a bit strange.

Thanks for the help.

Matt

Here you are my show file.

s.OLE_ForETC.csf

Hi,

Thanks for the answer. As I said, I've made some tests ans everything is ok only if I lock the tabs before recording a screen layout. I didn't test every tabs, but for me it occurs with the Masters View tab and the Device Controls tab. It's ok like this, but anyway it's a bit strange.

Thanks for the help.

Matt

Here you are my show file.

s.OLE_ForETC.csf

Thanks.

Do you have any external screens connected to your Cobalt 10?

Yes! Two displays connected with DisplayPort cables.
Matt

We have tried to reproduce anything similar here but without success. How do you record the screen layouts?
Via the Direct Selects or in the screen layout popup?

Hi,
I've tried "all" the ways to record the screen layouts (Direct select and popup windows) and with the [RECORD]+Layout button (between screens)... The problem is the same.

Matthias

Sorry for the delay. We have been trying to reproduce this here on different systems and with different people but we haven't been able to see this problem at all. So far, there are no other reports from the field about similar problem. It is a bit of a mystery.
So right now, there isn't much we can do to solve this problem for you. Sorry for the inconvenience.

Regards,
Anders