So this comes up on my JR when I use the S1 button S2 and S3 say Effect-enable record attrib-Effect-Enable record attrib-effect-enable on the DS buttons eaven if I have other things on the soft buttons. Why?
Johannes
So this comes up on my JR when I use the S1 button S2 and S3 say Effect-enable record attrib-Effect-Enable record attrib-effect-enable on the DS buttons eaven if I have other things on the soft buttons. Why?
Johannes
is this intended or a bug with the S-buttons? when I did take this picture my S-1 was programmed to have select all, select 2nd select 3d. feels like that should come up in the display and not this.
And while I'm on it: the whole soft key part is displayed in the JR display, except the S1-3. but that was maybe never the intention?
Johannes
The new soft key pages were only intended to be available on the screen. I'll see if it can be made to work on the Jr display as well.
The new soft key pages were only intended to be available on the screen. I'll see if it can be made to work on the Jr display as well.
on screen is fine, but that what happens on the JR display when I press the buttons feels wrong. it feels like it should work on screen and nothing happens on the JR, or they work on the JR display.
if the screen on the jr is free from the S-keys that would be the best. what happen now is that the s-keys blocks the JR display so if you want to use S1 with some specials for programming you can't now use the display and buttons of the JR for other things as long I'm in the S1. So if the S1-3 only are on screen, and not change the JR screen I feel it will bring the most not putting the same buttons on multiple places.
As a first step, I'll make sure that the Jr display will show the S-pages correctly and be able to act on the buttons. Making the Jr display independent of the soft keys on the screen is more complicated so that has to wait. But I agree with you that this would be the best solution.
www.etcconnect.com