Hello. I am trying to patch channel 71 to output 71 on Congo 8.2. When I try to do this I get the message "Input is out of range". I am able to patch channels 1, 2, 3, 4, and 5 to output 71 but no channel number higher than 5. Any ideas?
Where do you patch? In the Channel List, Output List or in the Output Editor? Does it happen with a specific show file or with a empty show file?
I am patching through Output Editor. It happens with most of my show files, but I can do it with a new 1:1 show.
I am not able to reproduce this. I have tried 71 CH 71 MODIFY and 71 OUTPUT 71 MODIFY. Both seems to work. Are you doing this differently in some way? Any chance you can attach a short video of the situation?
Here is a video. It shows that I am able to patch channel 1 to output 71, but unable to patch channel 71 to output 71.
Can you navigate to the Channel List (Browser>Patching>Settings and Tools>Channel List and see what the channel name (last column) is for channel 71?
I think you may have missing or unset channel names.
It said 0 and I changed it to 71. That fixed the issue. Thanks!
Good. But you said that you could repeat this with a new 1:1 show. I don't understand how that could be possible since then all the channel names are also set 1:1.
This was bad wording on my part. I meant that I was able to patch the channel with a 1:1. Sorry about that.