• Date
    opix
  • Date
  • Replies 1 reply
  • Subscribers 66 subscribers
  • Views 1807 views
  • Users 0 members are here

scroller calibration

Hi,

i'm using actually a PAR64 scroller (Congo Jr 6.3). I made the calibration for the roll. Can i have this calibration automatically affected on the wheels ? I tried but i can't do it. When i select my sroller, i can change the color by adjusting the wheel between 0 to 100, which doesn't match to the calibration page (0 to 255).

I can record color palettes but i thought i could have something automatic after my scroller calibration.

Thnks and sorry for my english (i'm a french user)

Mat 

 

Parents

  • Scroller Calibration doesn't affect the encoder wheel, you always have full control over the exact position of the string so you can do half (and 1/4) colours.

    Calibration is to adjust the values the scroller 'snaps' to:

    Type 4 and press the Color wheel down (button under it) to snap to Frame #4, or hold down the Color wheel to get a list of frames on your Direct Selects (eg on Master Playback Wing or above the encoders)

Reply

  • Scroller Calibration doesn't affect the encoder wheel, you always have full control over the exact position of the string so you can do half (and 1/4) colours.

    Calibration is to adjust the values the scroller 'snaps' to:

    Type 4 and press the Color wheel down (button under it) to snap to Frame #4, or hold down the Color wheel to get a list of frames on your Direct Selects (eg on Master Playback Wing or above the encoders)

Children
No Data
Related

www.etcconnect.com