Effect Question

Hi There

In a show im doing at the moment there is a particular effect we would like to use, basicaly there is 6 moving heads circling the around the stage (with the help of a dynamic effect) in the colour of Red, what we want to do is with just one hit of the go button make the movers go to O/W for a second then back to Red.

Is there a simple way of making this happen

Appreciate your help

Patch

Parents

0 Richard over 11 years ago

Just record the next step with White, and a step after that back to Red.

Then use a Wait time to automatically chain them together.

It does not matter which Attribute Record Mode you are using, so stick to the one you prefer.

If the Dynamic Effect Playback for the circling stays above 1% for any reason (even HTP from a Master), it will play continuously.

Old-style Dynamics stay running until the 'base' value changes (unless "Keep Running Dynamics" is ticked) or the Stop dyn effect is played.
I strongly recommend using Effect Playbacks in all new shows simply because it's so much easier to start & stop them.

[edited by: Richard at 2:58 AM (GMT -6) on Tue, Feb 5 2013]
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel

Reply

0 Richard over 11 years ago

Just record the next step with White, and a step after that back to Red.

Then use a Wait time to automatically chain them together.

It does not matter which Attribute Record Mode you are using, so stick to the one you prefer.

If the Dynamic Effect Playback for the circling stays above 1% for any reason (even HTP from a Master), it will play continuously.

Old-style Dynamics stay running until the 'base' value changes (unless "Keep Running Dynamics" is ticked) or the Stop dyn effect is played.
I strongly recommend using Effect Playbacks in all new shows simply because it's so much easier to start & stop them.

[edited by: Richard at 2:58 AM (GMT -6) on Tue, Feb 5 2013]
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel

Children

No Data