effects loading into submaster pages

Hi all,

Is there a way to load a effect straight into a submaster, I can record it into a preset the load this in but can't seem to load effect into it. Holding effect then a direct key on the sub doesn't work :( I know I just select at the bottom of the screen and wheel it up but would like to have these at hand on my subs.

Am I being thick here.

 

Carl

Parents
  • This is from an earlier thread as posted by Sarah-- 

    "You already can - it's just a bit strange to do so at the moment. This will also be fixed in a future release. For now, select your effect playback, [#] [Effect] then use [CH] & {MASTER KEY] to assign that playback to a master just as you would a device channel - meaning the fader and flash key will control intensity and the Master Key can be used to select that playback. No other parameters of the playback will be on that master."

    This works great and is how I've been doing my effects ever since.  The submasters are labeled as E1, E2, etc.

    J. R. Lidgett
    Salina Community Theatre

     

     

Reply
  • This is from an earlier thread as posted by Sarah-- 

    "You already can - it's just a bit strange to do so at the moment. This will also be fixed in a future release. For now, select your effect playback, [#] [Effect] then use [CH] & {MASTER KEY] to assign that playback to a master just as you would a device channel - meaning the fader and flash key will control intensity and the Master Key can be used to select that playback. No other parameters of the playback will be on that master."

    This works great and is how I've been doing my effects ever since.  The submasters are labeled as E1, E2, etc.

    J. R. Lidgett
    Salina Community Theatre

     

     

Children
Related