• Date
    SDum
  • Date
  • Replies 3 replies
  • Subscribers 66 subscribers
  • Views 7064 views
  • Users 0 members are here

Networking

Hello, things are getting messy in my head so I need some advice...

I have a Congo, a Net3 4 ports gateway, a laptop with latest NCE installed, and a switch. My questions are :

What IP adresse ranges are for congo? (and a future congo jr as backup as well)

In congo sw 5.0.1 there are 2 buttons in setup that lead to NCE or gateway setup. I can't open them.

which protocol am i supposed to use? Net2 or Net3?


thanks for answering, i will probably have further questions later... ;-)
Parents

  • My two cents:

    If you don't want to worry about IPs in the future and this is an isolated network, I would consider enabling the DHCP (Address Service) located in the Network tab.  As long as the adapter on the laptop and the future backup console is set up to use DHCP everything will happen automatically for you.  Now by default it assigns addresses starting at 10.101.50.101 and goes for 500 addresses.  The recommended IP range is well clear of this, so it shouldn't be a problem.



    [edited by: dmclaughlin at 2:10 PM (GMT -6) on Wed, Sep 10 2008]
  • in reply to dmclaughlin
    thanks guys,

    i will not try this at home! 

    but i certainly will try some of your answers as soon as i get to my favorite desk :-)
Reply Children
No Data
Related

www.etcconnect.com