• Date
    Richard J
  • Date
  • Replies 5 replies
  • Subscribers 65 subscribers
  • Views 8289 views
  • Users 0 members are here

Congo Jr Playback issue

Hi again,

Now, I'm probably doing something really stupid but...

 I have a Sequence loaded to my playback. Hitting 'Go' or using the crossfaders advances the Sequence, which is good, but I wanted to dip my active file by pulling down the 'A' fader and nothing happened ! -The cahnnels are shown in 'Live' as being at their present values. They aren't on anywhere else (if I clear the Playback, it goes dark). The Grand Master does pull the level down but I'm really puzzled as to why I can't dip the level of my active sequence step with the 'A' fader !?

 Answers on a postcard ?

Cheers

Richard

Parents

  • If you have the channel on in the A field and in the B field, moving the A fader to 0 won't change the intensity because of the dipless calculation.

    This logic makes sure that channels will always move straight from the value in A to the value in B without a dip.

  • in reply to Anders Ekvall

    Hmmm...

     I've got the Playback to crossfade both ways, but have the same preset in both steps of my sequence.

    Deleting the second step allows me to dip the fader at will but leaves me exposed to cutting to dark on an accidental knock of the 'Go' button.

    Is there any way to disable the dipless crossfade feature -(there are a few occasions where this might be useful) or is it a fundamental feature of the Congo ?

    Would setting the Playback to not advance sequence solve the problem of cutting to the empty step that seems to be added to the end of every sequence ?

    Thanks Again

    Richard

  • in reply to Richard J

    In answer to my own question, the 'Don't Advance Playback' option will suit my needs in ths situation...

    Would still be interested in disabling the Dipless Crossfade for other applications though...

     Cheers

    Richard

     

Reply Children
No Data
Related

www.etcconnect.com