EDMX Offset

Hi,

I have congo with 1024 output. I want the EDMX start from 1025. I tried to change the ETCNet2 EDMX Start to 1025 in System setting. actually, the EDMX is still start from 1. Have any idea???

Thanks

Parents

Anders Ekvall over 17 years ago

If you are running 4.3.0, please change the EDMX Start addresses in the Browser/Network/Universe Map instead.
There you can set it individually per universe.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Anders Ekvall over 17 years ago

If you are running 4.3.0, please change the EDMX Start addresses in the Browser/Network/Universe Map instead.
There you can set it individually per universe.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

KK Yeung over 17 years ago in reply to Anders Ekvall

Hi Anders,
Bingo!!
Many thanks!
So, it doesn't matter what setting of ETCNets start address in System Setting?

[edited by: KK Yeung at 1:30 AM (GMT -6) on Mon, Jun 04 2007]
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Anders Ekvall over 17 years ago in reply to KK Yeung

This is correct.
We should propably remove the old setting since it has no real purpose anymore.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel