Going back to V5

Speaking of reinstalling v5: I'm doing that today.

Is it necessary to remove the CongoHelpFile.exe application as well or will v510 run fine w/it in place? I'm gonna leave it alone unless it appears to cause problems today. Always on a weekend. 

Speaking of reinstalling v5: I'm doing that today.

Is it necessary to remove the CongoHelpFile.exe application as well or will v510 run fine w/it in place? I'm gonna leave it alone unless it appears to cause problems today. Always on a weekend. 

Glad to hear I am not the only one thinking of down grading back to V5, I had 2 or 3 shutdowns last week, and I was only homing some fixtures. Not really happy putting V6 into a show situation yet.

We've also gone back to V5.1 for stability.

No, you don't need to re-install the helpfiles as they're rolled back as well.

Hi,

I am sorry to hear that you find Congo v6 to be instable. If you have any more information about crashes or shutdowns, as well as dmp/log files, I would be very happy if you could send this to me for analysis so that we can get this fixed as soon as possible.

Best regards,

Anders

Hi all -

As Anders says, please send details of what you were seeing with v6 to the congo AT etcconnect DOT com address so that we can sort out a solution. We have a patch version (v6.0.1) that should be posted to the download site in the next day or so which does address a number of issues found in the last weeks since the release of v6.

Thanks much -

Sarah

Thanks Ric, I appreciate it! (I did ring ETC today to confirm, & only saw your post after).

Files are on their way, Anders & Sarah--hope they're useful.