• Date
    alabamaman
  • Date
  • Replies 3 replies
  • Subscribers 66 subscribers
  • Views 3426 views
  • Users 0 members are here

control single attributes by fader with congo

hello everyone,

i'd like to record some single attributes of moving heads:

for example dimmer, cyan magenta and yellow on 4 presets and mix them manually, like on avolites pearl using record by channel in mode 2.

I tried but diodn't manage to do it on congo. How can i do it?

Parents

  • Hi there,

    Masking is a nice solution, but you can do this also otherwise.

    When you're working live, you can also put the parameters directly under a masterfader.

    I'm working off-line now, so I show you the way by the browser .

    Browser/Masters/Masterlist.

    There you can put your master in the content type on parameter. and further your can put the right parameter in content.

    This works very fast and good. But be aware : if you want to use this live, your have to activate the channels first. When I'm don't have a fix show, I do use this a lot. A very quick way of working. Also for just programming.

    I hope that this will help you.

    Greets,

     

     

     

  • in reply to raf wouters

    To put an attribute directly onto a fader:

    • Hold down the Wheel Key for the attribute, and press the Master Key

    To remove it:

    • Open the Master List - [Modify] & [Master] or via the Browser
    • Change the master Content Type to blank.

     

Reply Children
No Data
Related

www.etcconnect.com