Dhcpd32 Application Error

Hi,

Have you done any changes to the console lately (like a software upgrade)?

Do you get this message each time you start the console? If so, please contact ETC Technical Service. Something might be corrupt in your system.

Hallo

No i dont did any updates or something else.

Its a brand new console. on the first time i startet there  was nothing , and as i startet the third or fourth time the message came, and now its on every start

regards Sudi

Hi Sudi,

one fix you could try :

1. Exit to Settings, open GCE, close GCE, then reboot

otherwise - this isn't a common problem, so its best that you contact your local dealer,

or ETC Tech Services to see about finding a solution for you.

For technical support in the Americas, please call 608/831-4116, or toll-free in the U.S. at 800/688-4116.
For technical support in Europe, please call (+44) 20 8896 1000.
For technical support in Germany, please call (+49) 8024 4700-0
For technical support in Asia, please call (+852) 2799 1220.

Hi,

Is the system connected to a network? If so, please check if disconnecting it from the network makes any difference.

Hallo

no its used as stand alone console

Can you go into System Settings > Network and let us know what is turned on?

Then turn all the "Network Services" off (unticked) and see if that solves the issue?

As there is no network, you don't want any of these network services.

THANK YOU THANK YOU

I turned off the Network status and now it starts without any Error messages.

regards Sudi

THANK YOU THANK YOU

I turned off the Network status and now it starts without any Error messages.

regards Sudi