• Date
    Orri Petursson
  • Date
  • Replies 4 replies
  • Subscribers 65 subscribers
  • Views 3611 views
  • Users 0 members are here

Various issues

Couple of issues to report:

When using Catalyst fixture, pressing the attribute wheel on colour (red, green, blue) does not take the value from 0 to 255 as it does on moving light fixtures.

Modify and Sequence does not open the active sequence list on the Congo jr as it does on the SR.

Can the auto rotate be taken off the IPod remote application as it nearly renders the tool useless (or at least adds serious time to its use).

Thanks,
Orri

Parents

  • Hi Orri,

    Thanks for your feedback.

    Catalyst: This happens because these parameters are not defined as contineous parameters in the template. They are defined with ranges and then the 0/255 toggle does not apply. I am not sure what the ranges are used for. If you don't need them, you can remove them from the template.

    Modify & Sequence: There is no such command in Congo. Do you mean MODIFY & PLAYBACK to open the current sequence list? This command should do exactly the same in all Congo consoles.

    Auto Rotation: This will be considered for a future update.

     

  • in reply to Anders Ekvall

    Deleting the parameters did the trick.  Modify and Playback is what I have been meaning to press for the last couple of days.

    On another note, can In, Dwell and Out timing adjustments on a chase effect be added to the U keys (U2 for instance)?

     

    Thanks,
    Orri

Reply Children
Related

www.etcconnect.com