You should do this from the output editor and use the corresponding EDMX numbering (since Congo doesn't support 2 digits after the decimal in direct entry). For reference:
Output 1.10 = EDMX 4609
Output 1.11 = EDMX 5121
Output 1.12 = EDMX 5633
You can find out the EDMX number for any output in the Output Lists.
You should do this from the output editor and use the corresponding EDMX numbering (since Congo doesn't support 2 digits after the decimal in direct entry). For reference:
Output 1.10 = EDMX 4609
Output 1.11 = EDMX 5121
Output 1.12 = EDMX 5633
You can find out the EDMX number for any output in the Output Lists.
That's because [1] [Level Wheel] will always control all the outputs patched channel 1. [4609] [Wheel] is trying to control all the outputs patched channel 4609 (which would only exist if you had renamed a channel to this number). You always need to select the output directly to control it by itself - so [4609] [Output] [Wheel] will bring up "dimmer" 4609.
