Auto Mark

Please correct me if I'm wrong as I don't use Automark, but if it works the same as Mark in terms of timing. The marked channels will use the same time recorded on the marked cue.

basicaly what i feel it does is if it knows it going to be used in the next cue it will move itself and set its beam colour and focus so when you press go it fades up exsacly where you plotted it

basicaly what i feel it does is if it knows it going to be used in the next cue it will move itself and set its beam colour and focus so when you press go it fades up exsacly where you plotted it

patch_250 said:

basicaly what i feel it does is if it knows it going to be used in the next cue it will move itself and set its beam colour and focus so when you press go it fades up exsacly where you plotted it

Attributes will move after the Cue has completed. By default (Auto)Mark uses the Cue Time for marking, if a more specificity time i.e.  Attribute-Time is applied to the Cue this time will be used. It will always use the most specific time for a given fixture.
so for instance you want to snap the move for Ch1, you apply a discrete Focus Time to CH1.

I hope that helps...