• Date
    Blackfaer
  • Date
  • Replies 3 replies
  • Subscribers 65 subscribers
  • Views 2667 views
  • Users 0 members are here

Best Practices for pulling channels out of a master in use

So the request I've had now multiple times that I can't answer is this:

I have a preset on a Master Fader at full and in use in the midst of the show. Say it has 75 channels at varying intensities. Channel 26 is at full in this preset. I want to take Channel 26 down to 40%. How do I do this quickly without having to bring the master down?

On old-school consoles the keypad would override the HTP control of a master; on the Congo the HTP control of the master takes precedence.

Suggestions?

Parents

  • Hi Mark,

    This is what CAPTURE is for!

    IIRC, double tap the CAPTURE button.  The LED on the button will light up.  Then change the level as you normally would.  When you are done, you can then RELEASE the channel.

    Experiment with it a little before using it in the middle of a show.

    Take care,

    John

     

Reply

  • Hi Mark,

    This is what CAPTURE is for!

    IIRC, double tap the CAPTURE button.  The LED on the button will light up.  Then change the level as you normally would.  When you are done, you can then RELEASE the channel.

    Experiment with it a little before using it in the middle of a show.

    Take care,

    John

     

Children
No Data
Related

www.etcconnect.com