• State Not Answered
  • Date
    menelaos
  • Date
  • Replies 2 replies
  • Subscribers 66 subscribers
  • Views 2627 views
  • Users 0 members are here

Manual Fade Times. Congo busking.

Hi there,

 

Is anyone knows if/how can apply a manual time for a palette.

For example lets say that we want all the spots to become blue (colour palette) in 10sec. In other consoles such as AVO, Chamsys you just select the group of lights and then you press the number 10sec and finally you select the palette. 

Parents
  • 0

    Hi Menelaos -

    Place the palettes you want to use onto direct select keys, select channels then type the time value and then press the direct select. So, for example:

    Direct Select 5 is Red, Direct Select 8 is Green

    I type 10 and then press DS 5, the selected lights fade to red in 10 seconds.

    I type 130 and then press DS 8, the selected lights fade to green in 1 minute and 30 seconds.

    Make sense?

    Thanks -

    Sarah

Reply
  • 0

    Hi Menelaos -

    Place the palettes you want to use onto direct select keys, select channels then type the time value and then press the direct select. So, for example:

    Direct Select 5 is Red, Direct Select 8 is Green

    I type 10 and then press DS 5, the selected lights fade to red in 10 seconds.

    I type 130 and then press DS 8, the selected lights fade to green in 1 minute and 30 seconds.

    Make sense?

    Thanks -

    Sarah

Children
Related

www.etcconnect.com