Augment3d point to focus pan flipped

Question

I have written a profile for a fixture, and now have the Augment3d model and real fixture, doing exactly the same thing. the propblem is when i point to focus in my Augment3d model, the fixtures (real and virtual) focus to upposite Pan. So if I point to DSR, it focuses to DSL, and USR, focuses to USL.

Robin Baston · Accepted Answer

The fixtures in question are 303 throu 307

eos moderator · Answer

This fix was released as part of 3.1.3. Thank you for bringing this up.

Matt Pumplin · Answer

Hello Robin, I've had a look at your profile and it appears that the issue is the User Range you've put down for Pan: 
 
 I find that if I make that range -307 to 307, then it appears to click-to-focus correctly for me. 
 
 As a spot-check, I switched out on of your fixtures for an ETC Releve Standard. It panned the way I expect, including using click-to-focus. Then, I changed its user range to be 540 to 0, and had the same issue that you describe on your fixtures, click-to-focus is backward. 
 So, I think you just need to adjust the User Value Pan range to be 307 to -307, and it should hopefully work as you expect. You might have to flip that range (go from negative to positive) to get it working properly for your instance.

Augment3d point to focus pan flipped

Top Replies