Building a Lighting fixture holidaycoro alphapix

Question

I need help construction a fixture to control an AlphaPix controller from holidaycoro. Ultimately i hav built some LED tube lights that are rgb and are comprised of 50 sections of 3 RGB LED or 150 DMX channels. Currently I can control this controller with madmapper, but would like to see if I could use the EOS Ti to do basic color of either the entire unit as one color or in two color. 
 The alphapix uses sACN (E1.31) for DMX input. So I have set the universe to 11 and fixture 1 to address 1 ofunvirse 11 or 11/1. The fixture that I created initially is RGB no intensity or anything else. Currently nothing works that I created so I am trying to figure out what to do different. If anyone can help me that would be greatly appreciated. 
 
 Thanks

Therese · Answer

Hi there, 
 Sorry for the delay in a response (I was out of the office last week). Do you happen to have a copy of the fixture profile manual with a complete DMX breakdown? I'd like to see if I can get this same profile to work on my end and I can also request that this profile be built for upcoming Eos fixture library software builds. 
 Best, 
 Therese