Feature and improvement suggestions

Feedback from users like you help us shape and improve Eos for all productions. We receive a large number of feature requests and suggestions from many sources, including this forum. Your comments and votes help us understand which features you’re passionate about, but there are many additional factors which inform development prioritization for any given release.

The most helpful information you can provide us when commenting on issues is how a particular suggestion would help you. If you describe your use-case and how the suggested change would benefit your work, it lets us gain a much deeper understanding of the need behind the suggestion. Suggestions often have an impact on what we work on, even if we ultimately choose not to implement a suggestion exactly as it’s described. Our ultimate goal is to understand what you and all users need and to create solutions that meet those needs. Occasionally, that’ll mean implementing a suggestion as described, but it usually means working to understand the need behind the suggestion and how we can meet that need for as many users as possible.

While we endeavor to update and respond to popular suggestions, the volume we receive means there will be occasions when we can’t provide an update or response in a timely manner. For bugs and show-critical issues, please use our standard forums and support structures: https://www.etcconnect.com/Contact/Technical-Support.aspx

  • Arfr with QRCode selection

    • 0 Comments
    Hi folks, In my theatre i use Generator QR Codes for battens , fixtures and dimmer outlets. I configured them to give important Informations like SWL, Adress, Max. Output etc. The Codes are based on the format of the TPSR QR Codes with advanced Information...
  • Popup Magic Sheet View Support

    • 0 Comments
    Popup Magicsheet has no support for a View Would be great for reusability of already existing Magicsheets. I use macros to change popup Magicsheet. This would enhance usability of the Popup Magicsheet. Cheers Benjamin
  • Multiple MIDI Transmit Source IDs

    • 0 Comments
    Howdy! On Eos 3.3.0 b549, I am able to set multiple DMX Recieve IDs (eg: from multiple Response Gateways) using the + to delineate, but I am not able to do the same to MIDI TX; this would be helpful to delineate between which devices (each assigned...
  • Idea/ Feature request for arfr

    • 0 Comments
    Hi folks, In my theatre i use Generator QR Codes for battens, fixtures and dimmer outlets. I configured them to give important Informations like SWL, Adress, Max. Output etc. The codes are based on the format of the TPSR QR Codes with advanced Information...
  • Use camera as Color reference

    • Under Review on
    • 1 Comment
    Spending a lot of time to get my colorpalettes accurate thru different fixtures, I was thinking there should be a way to automate that process. The color estimation of eos (for “unknown” fixtures) is not bad but far away from perfect. That is because...
  • Virtual Crossfade Parameter

    • 0 Comments
    When working with hybrid/tunable white fixtures, it can be preferable to control the color with Intensity + Crossfade channel instead of Intensity + Warm + Cool. Often, the controller does not have a control mode to do this. A virtual crossfade would...
  • Augment 3d Haze

    • 0 Comments
    The Augment 3D Haze is currently very unrealistic (for example the beam, gets brighter the further away it is from origin) The Haze is currently also spread exactly equal throughout the whole model. With the new "Zone" box in Augment 3d, it would be...
  • Settings request: number pad factor of 10x or not

    • 2 Comments
    Hi! I'm sure that this has been mentioned before, but for those of us who work in film and television and are regularly using extremely high-powered LED fixtures close to the action, being able to hit [channel 1] + [at] + [3] + [enter] and having the...
  • iRFR Focus Wand w/A3d Disabled

    • Planned for Future on
    • 1 Comment
    iRFR devices that cannot access Focus Wand because A3d is disabled on the connected Eos device should say so, instead of just hiding Focus Wand. Thanks, Scott
  • 3d Model Library For ETC HES Products

    • 0 Comments
    Hi Everyone, I don't know if this already exists or not but I am wondering if there is an online library for ETC and HES 3d fixture models to import into vectorworks and such? If not then that would be amazing to have. I know there are the profiles...