So, it's been a while since I've been in the booth, and I'm running a show in a local theater. We have an Element 2 board, and SourceFour LED fixtures. I want to create a strobe effect for a brief scene in the show. Not the strobe effect built into the board (which is really a chase), but actually have all of the lights strobe together, to create a strobe as an actor "falls" from a ledge to the stage.
I haven't found a direct explanation on how to do this, but it looks like the feature is built into the fixtures.
My question is: (a) Can these fixtures be programmed to strobe together, and (b) How would I set this cue using the Element 2 board?
Thanks in advance.
Source4 LED fixtures have the ability to Strobe. You will have to have the strobe parameter enabled on the fixtures in order to control that feature from the Element 2.
Thank you, Seth. That's what I was hoping. I just have to get back behind the board to check it out.Fingers crossed.