• State Suggested Answer
  • Date
    Tallnickg
  • Date
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 188 subscribers
  • Views 2794 views
  • Users 0 members are here

how do you make a Blank cue that does not affect the values of the previous cue So I can trigger an AV effect in cue list 2?

The trigger part is easy via the ext link field and works. However I have the need to have cue list 2 triggered not only in some cue list 1 cues but also separately  to any lighting changes in list 1

So I need a way to 'hold' the ext link data in a cue in list 1 but without having any other channel dat present In that cue or I will end up having to duplicate the LX cues which is ridiculous

Tried releasing all channels but then I lose al the output ...... Tried using make null also but this is unreliable as it seems to work once and then I lose all he out out again

This must a be a standard requirement surely ? The second cue list is driving a video subsystem via dmx

Any ideas ?

Thanks

Nick

Parents
  • 0

    Assuming that the AV is controlled via a patched fixture be it a simple dimmer or possibly a media server. You need to make sure that only those specific channels relating to AV are recorded into cue list 2 and nothing else.

    You may find using Partitions will help you achieve this or by being very specific within your syntax. [Channel] [1] [Record] [Cue] [2] [/] [1] [Enter]

Reply
  • 0

    Assuming that the AV is controlled via a patched fixture be it a simple dimmer or possibly a media server. You need to make sure that only those specific channels relating to AV are recorded into cue list 2 and nothing else.

    You may find using Partitions will help you achieve this or by being very specific within your syntax. [Channel] [1] [Record] [Cue] [2] [/] [1] [Enter]

Children
No Data
Related

www.etcconnect.com