Our studio has been running by ethernet converted to 5 pin DMX. Now I want to start adding ethernet fixtures Source 4wards). I tried a random address that is already programmed into our ELEMENT console, but the fixture won't come on. What do i need to do to get it working.
Maybe your house wiring don't follows the ESTA standard, have a look to www.etcconnect.com/.../DMX-Over-Cat5.aspx
Thanks for the reply. I am going t guess that the house wiring does follow the ESTA standard, since it is brand spanking new. (only a year old). That being said, I probably need to learn what the ESTA standard is. Can you recommend a book or information source that breaks all this stuff down.
Have a look to http://tsp.esta.org/tsp/about/index.html
This page is more than posted above, but far less than the formal standards.
This guy does some friendly tutorials on lots of topics.