After Update ETCnomand to 2.7.4 Build 12 and update Gatget to 126.96.36.199.0.5 i got blinking LED-PARs.If i put a DMX-Tester (E-Spion) between and make DMX-Refresh, the LED-PAR work well.In the old Nomad Version I could change the Paramenter in the ETCnomad Shell \ Setup \ of the GADGET DMX-Refrechrate. Now I can't find how to parameter the GADGET.
Same bevore I could activate RDM by ETCnomad Shell \ Setup \ - Now I only find that possibility in the Patch.Maybe it is RDM? But how I can deactivate it? (Secound way, cause in the Patch I did allreaddy).
In the shell look at / network / interface protocols. It sounds like a RDM problem.
Hello! Local I/O settings moved into Setup in v2.7. The speed and the RDM settings for local DMX like Gadget are now in Browser>Setup> System Settings>Output
Thanks - RDM caused the Problem - Switch off... every thing is fine.
Thanks a Lot ... I Found it. Your Hit was brilliant. I was surching 4h until now. And - of course - there was RDM on - Switch off... every thing is fine.You save my Day!