I need to patch 4 separate Supernight LED light strips to ETC Element light board.

do you have a manual or do you know which dmx address does what?

I do have a manual and have read through patching an LED light fixture. Someone else has hooked up the lights and I have not been given the addresses as yet. I'm just not entirely sure how to proceed given that the fixture is not in the library and I will have to use "generic" when asked to identify the light

in the manual there should be a list of what addresses do what. can you take a picture/scan it and upload it here? (to upload click Reply, then Insert, then Image/video/file)

I apologize but I cannot find a list of what addresses do what in the general manual

There are other lights patched to the light board - we are working in only one universe

In order to know how to patch these fixtures, or how to create a profile for you, we need to know the control layout for DMX for the fixtures themselves. The only Supernight LED strips I can find online are not DMX controlled at all.  Do you have a DMX decoder connected?

Ugh I don't know - have been trying to find out - I wasn't in on the choice or hookup of the strips - they just did it and want me to patch them to the light board. These are the lights:

Supernight

RGB + Cool White, Mixed Color Changing LED Light Strip （No Power Included）

150pcs RGB LEDs + 150pcs White LEDs

• LED Type: SMD 5050
• Light Color: RGBW (RGB+Cool White)
• Length: 500cm/16.4Ft
• Width: 1cm Height: 0.25cm
• White Temperature: 6500K-7000K
• Working Current: 5A
• Working Input Voltage: DC 12V
• Waterproof Rating: non-waterproof
• LED Quantity: 300 LEDs Per 5 Meter or 60 LEDs Per Meter

I just heard back from one of the people working on this - they haven't even hooked up or addressed the lights - I need help

Apparently there are a couple of decoders at church but they have not connected them. I am attempting to learn DMX in a very short amount of time now in addition to my original question of patching those lights

Apparently there are a couple of decoders at church but they have not connected them. I am attempting to learn DMX in a very short amount of time now in addition to my original question of patching those lights