Options
Related

TouchOSC fader dropping desk fader to BO?

Hello forum,
If I adjust a virtual fader on iOS/TouchOSC/Hog4 template I see the change on RoadHog 4 - but removing finger results in BO on console master. Why is this; a limitation of OSC/non motorised faders or something wrong with the settings?

The manual's a bit thin on these details. Any help gratefully received.
Thanks. D
Parents
  • 0
    When you launch the OSC app the faders are at 0 so when you move the OSC fader the intensity will jump from the value of the consoles fader to the value being sent from the OSC fader and since you are coming off of 0 this will give the impressing at the faders are jumping to 0.
    Since the RH's faders are not motorized they go into an unlocked state, you see this by the red line (RH fader value) and blue bar (OSC fader value), in order to re-lock the RH fader you must move the fader to the current OSC fader location.
Reply
  • 0
    When you launch the OSC app the faders are at 0 so when you move the OSC fader the intensity will jump from the value of the consoles fader to the value being sent from the OSC fader and since you are coming off of 0 this will give the impressing at the faders are jumping to 0.
    Since the RH's faders are not motorized they go into an unlocked state, you see this by the red line (RH fader value) and blue bar (OSC fader value), in order to re-lock the RH fader you must move the fader to the current OSC fader location.
Children
No Data

www.etcconnect.com