Options
Related

OSC with Medialon

Has anybody experiences about using the OSC with other computers as remote controllers?
I'm working with a Roadhog, which has no built in Timecode/Midi slot. I want to synchronise my cuelists with the Medialon system, which has a built in OSC control unit as well.
Somehow the roadhog doesn't react on the Medialon commands.
The network connection is ok, Touch OSC over the iPhone is working fine on the same time.
There are examples how to write the commands in the manual, I'm not sure, if I write the commands correctly in the Medialon command line.
Are there spaces in between the commands and the "/" ?
Actually I need just a single "go" command from the Medialon system…
Parents
  • 0
    Veit, like already said via text-message, seems there is still no OSC message received correct.
    Have you configured the Medialon correct, so that there OSC is send to the IP adress and OSC In port of your Roadhog?!

    There can be only one transmitter and receiver at the same time, in the transmitter you put in the IP adress of the receiver and vice versa.

    You can also text me, or drop me an email... Makes it easier also to write and talk in german or swiss ;)

    Best

    Marc
Reply
  • 0
    Veit, like already said via text-message, seems there is still no OSC message received correct.
    Have you configured the Medialon correct, so that there OSC is send to the IP adress and OSC In port of your Roadhog?!

    There can be only one transmitter and receiver at the same time, in the transmitter you put in the IP adress of the receiver and vice versa.

    You can also text me, or drop me an email... Makes it easier also to write and talk in german or swiss ;)

    Best

    Marc
Children
No Data

www.etcconnect.com