Hog 4 backup

Hi,
I have a set up with 2 Hog 4, set with the same ID number server and DP8K, so they can run in full tracking mode. One DP8K is running and the other is Idle, in case of failure of the active DP8k I'd like the other to take over . The dmx is feed via Artnet. Can this be done in this case ? because when I kill the active DP8k the other one stay in Idle state, there's no automic switch.
Thanx

Parents

0 mitch - Former HES Forum Member over 5 years ago

Hi, the patch will need to be cloned from the first DP8000 to the second DP8000.

If both DPs have Net Number 1, one of them will need to be changed to Net Number 2 for example, as the DPs cannot have the same Net Number.

Then in the Fixture Window, select the View By DP button. Then a CLONE DP button will appear. Clone DP 1 to DP 2.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 mitch - Former HES Forum Member over 5 years ago

Hi, the patch will need to be cloned from the first DP8000 to the second DP8000.

If both DPs have Net Number 1, one of them will need to be changed to Net Number 2 for example, as the DPs cannot have the same Net Number.

Then in the Fixture Window, select the View By DP button. Then a CLONE DP button will appear. Clone DP 1 to DP 2.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data