Hi there If you Change the FX Speed with the Encoder to max an then you'll go back, it stop at 107.7bpm, after a while the value reduce to stop between 30 and 40.... Cheers Hg
Not sure I fully understand what you are doing so please let me know if I have this wrong.
Call up a unit in the programmer Apply an FX Using the Encoder dial FX rate to 960bmp As you are dialing back to 0, the encoder stops at 107.7bmp Then if you do it again you stop between 30 or 40bpm
Please let me know if I am testing this correclty as I am not seeing this problem.
I am finding this also on my Hog 4, but not on Hog 4PC. When the speed goes over 100bpm the freezing starts when you reduce the speed. The higher you first go, the more pronounced the problem is as you reduce the speed.
