Options
Related

Time code with a Hog4pc

Ok so now i am crazy

Trying to do Lighting, Audio Playback and Time code of the Same PC.....
I am maybe hoping there is a way to do this.
I am using a Hog 4pc with Super widgets for show play back. I would like to Play a music track that i can send out of the PC on a loop
Left is Time code, Right is audio. Is there a way on the PC i can do this and also get the time code to the HOG4 software?

Thoughts

I am guessing i will need to get the LTC widget and Play the audio out and split externally
Parents
  • 0
    [QUOTE=chezzsstake;67983]I am guessing i will need to get the LTC widget and Play the audio out and split externally

    Yes, if you split out the audio from the headphone jack on the computer, you can send the SMPTE to an LTC widget hooked up to the same computer, and then send the other side/channel to your audio system.

    Be sure your audio is truly isolated on the right/left sides and not just "panned" over to avoid the SMPTE and what you want to hear in the audio from ghosting slightly onto each-others' channels.

    Hope this helps. :)
Reply
  • 0
    [QUOTE=chezzsstake;67983]I am guessing i will need to get the LTC widget and Play the audio out and split externally

    Yes, if you split out the audio from the headphone jack on the computer, you can send the SMPTE to an LTC widget hooked up to the same computer, and then send the other side/channel to your audio system.

    Be sure your audio is truly isolated on the right/left sides and not just "panned" over to avoid the SMPTE and what you want to hear in the audio from ghosting slightly onto each-others' channels.

    Hope this helps. :)
Children
No Data

www.etcconnect.com