• State Not Answered
  • Date
    nickd - Former HES Forum Member
  • Date
  • Replies 2 replies
  • Subscribers 21 subscribers
  • Views 584 views
  • Users 0 members are here
Options
Related

Need Help Creating Strobe Control For Colorforce 72's on Road Hog 4

Hey,
First up let me just say that I'm not a real lighting guy, I'm an AV tech who does lights so I apologise for the holes in my knowledge of lighting!

We have been using Hog 4's at my work for a while now and I'm trying to work out a way to make our Chroma Q Color FOrce 72's strobe randomly.

I'm running the lights in Mode 4 which means each fixture has 12 cells of RGBA so with 7 fixtures we have 84 cells in total and this seems to gives us the best control overall.

I tried to edit the patch in the fixture builder and just add an intensity strobe control to each DMX channel and assigning the control as rate instead of shutter, however this just acted like an intensity control and didn't make anything strobe.

I'm sure there's a million ways to do this so hopefully a real lighting guy can help!

Cheers

Nick
Parents
  • 0
    Nick,

    What fixture profile are you using?

    For now I'll assume you're using the RGB+A from the Generic File.

    Select your fixtures.
    Set Intensity at 50%
    Double tap the Effect key.
    The first Column is Table.
    In the row Intensity double click the Table column cell and select Step.
    Press the Effect key once to bring up the parameters on the encoder wheels

    Adjust the first one for your strobe rate.

    Now to get the Random,
    Hold the Fan key and select Shuffle in the right monitor.
    Keep holding Fan and dial the third encoder called Effects Offset

    You may have to play with it a couple times to get the feel it creates.

    Hope this helps.
Reply
  • 0
    Nick,

    What fixture profile are you using?

    For now I'll assume you're using the RGB+A from the Generic File.

    Select your fixtures.
    Set Intensity at 50%
    Double tap the Effect key.
    The first Column is Table.
    In the row Intensity double click the Table column cell and select Step.
    Press the Effect key once to bring up the parameters on the encoder wheels

    Adjust the first one for your strobe rate.

    Now to get the Random,
    Hold the Fan key and select Shuffle in the right monitor.
    Keep holding Fan and dial the third encoder called Effects Offset

    You may have to play with it a couple times to get the feel it creates.

    Hope this helps.
Children
No Data

www.etcconnect.com