• State Not Answered
  • Date
    dirkmaat
  • Date
  • Replies 15 replies
  • Subscribers 22 subscribers
  • Views 862 views
  • Users 0 members are here
Options
Related

Full Boar Full Install stuck on 'Detect and mount CD-ROM'

Hi,
I try to do a Full Install on a Full Boar 4 console, but everytime the installation stops with on screen 'Detect and mount CD-ROM' and nothing happens anymore. This appears right after i pressed Enter (Hog4 installation. Press Enter to begin).

I tried 7 different usb drives from different brands and capacitys, created with Linux Live USB creator (on different windows machines) as discribed in the full install instructions.
Also tried different software files, different usb ports, with and without usb keyboard connected.
No other devices are connected to the console.

Please let me know if there is anything more i can try.
Thanks.
Parents
  • 0
    Thank you for taking this serious.
    Allright, I'm seeing the kernel panic screen only when i boot from the Unetbootin stick, and not every time.
    An other hard drive makes no difference.

    I tried it with different sticks again, each every time in an other usb port, on the top and the four on the back. No difference.

    If i start the console normal, it runs happy and i can browse the usb stick, seeing all files and folders.

    If i connect a playback wing on the usb ports at the back it works as normal (not on the usb port at the top).

    If i boot with the Linux Live stick, just before the 'Detect and mount CD-Rom' screen, there is some text on screen, but so fast it is unreadable. I filmed it and played it back in slow motion. I can't read everything, but i could see this text on screen:
    [ 1.430722] hub 1-0:1.0: unable to enumerate USB device on port 1
    Starting system log daemon: syslogd, klogd.

    Then: Trying to enable the frame buffer...
    Then: some very fast text i can't read and then 'Detect and mount CD-Rom' with very short on the same screen:
    Detecting hardware to find CD-ROM drives
    Detecting hardware, please wait...
    Starting PC card services...

    What can i do next?

Reply
  • 0
    Thank you for taking this serious.
    Allright, I'm seeing the kernel panic screen only when i boot from the Unetbootin stick, and not every time.
    An other hard drive makes no difference.

    I tried it with different sticks again, each every time in an other usb port, on the top and the four on the back. No difference.

    If i start the console normal, it runs happy and i can browse the usb stick, seeing all files and folders.

    If i connect a playback wing on the usb ports at the back it works as normal (not on the usb port at the top).

    If i boot with the Linux Live stick, just before the 'Detect and mount CD-Rom' screen, there is some text on screen, but so fast it is unreadable. I filmed it and played it back in slow motion. I can't read everything, but i could see this text on screen:
    [ 1.430722] hub 1-0:1.0: unable to enumerate USB device on port 1
    Starting system log daemon: syslogd, klogd.

    Then: Trying to enable the frame buffer...
    Then: some very fast text i can't read and then 'Detect and mount CD-Rom' with very short on the same screen:
    Detecting hardware to find CD-ROM drives
    Detecting hardware, please wait...
    Starting PC card services...

    What can i do next?

Children
No Data

www.etcconnect.com