• State Not Answered
  • Date
    rolfwenzel
  • Date
  • Replies 3 replies
  • Subscribers 21 subscribers
  • Views 280 views
  • Users 0 members are here
Options
Related

Dimming steppy with fixtures in 3.8.0?

Hey Guys,

just searched the forum but did not found anything actual.

Issue: On the weekend something like 40 Fixtures, 2 universes, on a festival stage, connected through artnet. The dimming, manually as in FX was very "steppy" means it looked more like a 4bit dimming rather than 8bit.
Fixtures were Mythos standard and B-Eye K10 easy standard.
Everything else like Movements, fades and FX (except Intensity FX) ran absolutely smooth, just the intensity things were weird.
Restart did not help..

I came across this a few weeks ago where this happened with a Quantum Spot Fixture, connected via DMX, but was not that steppy if i could remember right.

Setup is:
Nano with 8 universe
DELL AIO Touch
Hog 3 Wing
SW 3.8.0

Maybe somebody else encountered this?

All the best

Rolf

Parents
  • 0
    Hey Rolf,

    I only had something similiar with artnet into ClayPaky ShowBattens.
    So I was wondering if you used any nodes or did you run artnet direct into the fixtures?

    Seems like ClayPaky networkcards dont like Gbit. I changed the connection speed on my switches to be fixed to 10mbit and all was fine. Although the speed was set to be auto-detect and the switch was showing 10mbit before.
    Had this as well with Catalyst and Eledy fixtures in the past

    Hope that helps
Reply
  • 0
    Hey Rolf,

    I only had something similiar with artnet into ClayPaky ShowBattens.
    So I was wondering if you used any nodes or did you run artnet direct into the fixtures?

    Seems like ClayPaky networkcards dont like Gbit. I changed the connection speed on my switches to be fixed to 10mbit and all was fine. Although the speed was set to be auto-detect and the switch was showing 10mbit before.
    Had this as well with Catalyst and Eledy fixtures in the past

    Hope that helps
Children
No Data

www.etcconnect.com