Hi I wonder can I make an effect using more than two palletes? I know I can do it with 2 " effect@position 1 thru position 2" Also when I do this I must type "position 1" because if I call it with the name given to it it doesnt work
You can not do an effect through multiple palettes, but you can Fan through multiple parameters, and then do an effect off that.
For example: Say you want a "Red>Green>Red" as your base value for a set of lights. You can give them a 100% saturation, and hold [SET] and type [0] [Thru] [120] [Thru] [0] The lights will Fan from Red>Green>Red. Then you can put an effect wave on that.
You can do this with most parameters, with multiple fan points.
You can not do an effect through multiple palettes, but you can Fan through multiple parameters, and then do an effect off that.
For example: Say you want a "Red>Green>Red" as your base value for a set of lights. You can give them a 100% saturation, and hold [SET] and type [0] [Thru] [120] [Thru] [0] The lights will Fan from Red>Green>Red. Then you can put an effect wave on that.
You can do this with most parameters, with multiple fan points.
