• State Not Answered
  • Date
    audioguy42
  • Date
  • Replies 4 replies
  • Subscribers 26 subscribers
  • Views 1005 views
  • Users 0 members are here
Options
Related

Midi not responding to notes after 1st note

I'm trying to setup midi control of a hog4 pc. Right now I'm trying to use midi to control the main go button or go for a specific cue list. I can get it to work once, but then it doesn't continue to go. If I quit the hog and get back in it will work once again. Is there something limiting using the same note again and again? I've tested using master go and cue list go but once one command has gone I can't get any other midi commands to work. Manual controls still work, I can see the midi notes coming in on the midi viewer but it just doesn't respond to them

Parents
  • 0

    With regards to buttons, the "off" is required to toggle the button back to its UP state. When you use OSC/MIDI to virtually control buttons the button does not return to the logical up state until the OFF is received. That's a Hog thing, as buttons can be held down while other buttons are pressed to create "chords" as if you are playing the piano. The easiest example of a "chord" is "pig release", holding down the pig button then hitting the release key.

Reply
  • 0

    With regards to buttons, the "off" is required to toggle the button back to its UP state. When you use OSC/MIDI to virtually control buttons the button does not return to the logical up state until the OFF is received. That's a Hog thing, as buttons can be held down while other buttons are pressed to create "chords" as if you are playing the piano. The easiest example of a "chord" is "pig release", holding down the pig button then hitting the release key.

Children

www.etcconnect.com