Options
Related

Effects cue off updated

Hi high end,

This problem is on the hog 3 and on the hog 4.

I always record an OFF cue in the effects engine(to stop any effects happening),
When I select effects and hit the off cues the first light in the chain carries on and does not stop and it's just not 1 light it's the 1st light of every different kind of fixture(spot,wash,led and so on).

Many thanks
Parents
  • Yes.

    I just checked this again. I made 2 effect palettes. The first has Fixtures 1 > 10 at 50% with a Sine wave effect. The second was Fixtures 1 > 10, Effect Off only

    Cue 1 contains Fixture 1 > 10 referencing the 1st palette
    Cue 2 contains Fixture 1 > 10 referencing the 2nd palette

    Opening the cue editor, cue 2 shows an OFF value for Fixtures 2 > 10, but a blocked Sine value for Fixture 1
Reply
  • Yes.

    I just checked this again. I made 2 effect palettes. The first has Fixtures 1 > 10 at 50% with a Sine wave effect. The second was Fixtures 1 > 10, Effect Off only

    Cue 1 contains Fixture 1 > 10 referencing the 1st palette
    Cue 2 contains Fixture 1 > 10 referencing the 2nd palette

    Opening the cue editor, cue 2 shows an OFF value for Fixtures 2 > 10, but a blocked Sine value for Fixture 1
Children
No Data

www.etcconnect.com