Options
Related

Fixture control in a circle

I have 40 lekos in a circle facing a single point. I would like to be able to adjust the on fixtures (and the spread) quickly (clock-wise and counter), according to where a camera lands (on a Dolly track)

I’ve thought of just pixel mapping and moving the window to the desired position, but was wondering if there were a cleaner or better way...

Parents
  • 0
    I added 40 dimmers to a show and a pixel map layer.

    Selected the fixtures created a 500x500 circle gang
    Created a 525*525 pixelmap layer

    Mapped the fixtures to the plot
    Selected the layer @ full and choose some of the circle media in folder 7
    Give a Z rotation of 0 (not Index)

    Record that onto a master. Give this cue list persist on override!
    Clear
    Select the layer again and give it an image Z rotation of 100(Or whatever the fastest you will need)
    Record that to a master.
    Change the fader to IPCB crossfader
    Clear

    Enjoy!
Reply
  • 0
    I added 40 dimmers to a show and a pixel map layer.

    Selected the fixtures created a 500x500 circle gang
    Created a 525*525 pixelmap layer

    Mapped the fixtures to the plot
    Selected the layer @ full and choose some of the circle media in folder 7
    Give a Z rotation of 0 (not Index)

    Record that onto a master. Give this cue list persist on override!
    Clear
    Select the layer again and give it an image Z rotation of 100(Or whatever the fastest you will need)
    Record that to a master.
    Change the fader to IPCB crossfader
    Clear

    Enjoy!
Children
No Data

www.etcconnect.com