Fixture profile issue: Elation E Spot III Extended

The profile for the Elation E Spot LED III (extended) fixture has a couple issues:
1. Missing Frost filter
2. Gobo wheel rotation is not defined correctly, so what the fixture does is not consistent with what the Hog UI indicates.

I looked at the existing profile and it appears to be an easy fix; it should be fixed in the standard library, however, as (right now) it takes functionality away from the fixture.

Fixture DMX reference is here: cdb.s3.amazonaws.com/ItemRelatedFiles/9809/elation__E_SPOT_III_dmx_traits_ver_1.pdf
See channel 10 (Extended) for the Frost filter value and channel 7 (Extended) for the correct gobo wheel CW/CCW rotation values.

Cheers,

-kbx

Parents

0 kbx81 - Former HES Forum Member over 8 years ago

Tonight I was at our venue and I fixed the profile (I found a couple other issues in addition to those listed above) and tested it with the fixtures. It works correctly now. Is there a way I can export and upload it for others and/or to help the folks at HES? :)

-kbx

Reply

0 kbx81 - Former HES Forum Member over 8 years ago

Tonight I was at our venue and I fixed the profile (I found a couple other issues in addition to those listed above) and tested it with the fixtures. It works correctly now. Is there a way I can export and upload it for others and/or to help the folks at HES? :)

-kbx

Children

No Data