No link between Focus Point and Cue

My first question is when you recall the focus point in a cue, do you see the focus point number in grey under the channel's level?  If not, then you are not referencing the FP, you are just recalling it's data and that would be why your updates aren't global.

-Tim

Xander said:

My first question is when you recall the focus point in a cue, do you see the focus point number in grey under the channel's level?  If not, then you are not referencing the FP, you are just recalling it's data and that would be why your updates aren't global.

 

-Tim

Oh yeah, that was the other thing I meant to mention.... when he did it, the focus point numbers showed up under the channel numbers when he re-called a recorded cue, but when I do it they don't show up... I must not be hitting the buttons correctly: [Record] [Focus Point] [#] [Enter] is what I've been using to record the focus point and [Focus Point] [#] [At] [Full] then [Record] [Cue] [#] is what I have been using to apply the focus point to the cue. But I'm guessing that is what I'm doing wrong. What should I be doing?

Thanks for you help!

You are correct, that is not quite the correct syntax for what you want to do.  What you are doing will recall all the information in the focus point as it was recorded.  It will not reference the FP, though.  Hence, no grey numbers.  At that point, a FP is acting exactly like a group.  To reference you need to use [@] [Focus Point] ##.  What's great about FPs is that you can do a selective recall, e.g. [Channel] [1] [Thru] [8] [@] [Focus Point] [6] [Enter].  This will put channels 1 through 8 at there respective values for FP6 and reference them.  You can make a selection of any or all the channels in the FP, you don't have to use the FP as a whole.  This is one thing that makes them more powerful then just groups.  If you do want the entire FP as whole recalled on stage and referenced, you can use the FP number as a group selection, and then set them at the FP for reference.  The syntax would be, [Focus Point] [4] [@] [Focus Point] [4] [Enter].

Let me know if that didn't make any sense, but that should solve your issue.

-Tim

Sorry, but I'm a little confused... I believe you gave two different syntaxes:

Xander said:

[@] [Focus Point] ##

Xander said:

[Focus Point] [4] [@] [Focus Point] [4] [Enter]

Can you clarify which one I'm supposed to use?

Thanks again,

Kyle

They are the same syntax, the first was just a brief reference to the type of command you want.  The second was an actual example including number and everything.  You will notice that the second (the example) includes the first as part of it.

They are the same syntax, the first was just a brief reference to the type of command you want.  The second was an actual example including number and everything.  You will notice that the second (the example) includes the first as part of it.