Hello All,
I have a 250 which was working until just a while ago. We have Strand dimmers and Strand nodes which takes the DMX from the 250 and converts it to Strand's network signal. All has been fine for a few years. Now, the node is shutting down when plugging the DMX cable into the 250. The node powers up just fine from the POI network cable. As soon as I plug in the DMX out, the node dies. It restarts after I disconnect the 250.
Thoughts? If I test the DMX out from the 250, what should I be looking for? I've already tried changing cables, etc.
Thanks, Scott
