• Date
    iridius
  • Date
  • Replies 2 replies
  • Subscribers 52 subscribers
  • Views 5840 views
  • Users 0 members are here

ETC Express 24/48 Bump Buttons Question

Recently we had someone come in and rent our space at our theater. Once they renter left, our light board didn't work quite the same. Our board is from 1996, so you'll need to reach back perhaps to answer this one.

The second row, 25-48, of bump buttons, lights up channels 1-24, respectively. We'd like to have the bump buttons one to one. Also, the bump buttons do NOT override programmed lights.

I've set the channels 1-to-1. I've enabled bump buttons. Still no luck.

Help, please? :)

Parents

  • It sounds like your board has been set to Two-Scene mode:

    • [Setup] 1 - System Settings.
    • Option 15, then choose either 2 (One Scene without Subs) or 3 (One Scene with Subs)

    Alternatively, you could Reset the System which will clear everything back to factory defaults:

    • [Setup] 4 - Clear Functions
    • [S1] - Reset System
Reply

  • It sounds like your board has been set to Two-Scene mode:

    • [Setup] 1 - System Settings.
    • Option 15, then choose either 2 (One Scene without Subs) or 3 (One Scene with Subs)

    Alternatively, you could Reset the System which will clear everything back to factory defaults:

    • [Setup] 4 - Clear Functions
    • [S1] - Reset System
Children
Related

www.etcconnect.com