• Date
    John
  • Date
  • Replies 4 replies
  • Subscribers 51 subscribers
  • Views 5533 views
  • Users 0 members are here

ETC Express Power supply

Hey everyone, well it's been a while since I've posted here. 

Well here's my problem, we have a small studio space which we put an old ETC express. Recently a pin came out of the power supply when someone moved it or whatever its story is. So now one of the 8 pins on the power supply is not there. What's the best option in your minds? Try and go in there remove the metal guard around the pins and do a tight little soder job or spring for a new power supply. I mean are there any good options I should consider?

Thanks for you help.

-John

Parents

  • Probably not a good idea to try to resolver that pin.  You don't want it to break off in the board.  The power supplies seem to have about an 8-10 year life, so an 8 pin is in that life span for sure.  I would just replace it before it starts to give you problems down the road.  Just call your local ETC Dealer and they can get you one very quick.

     

Reply

  • Probably not a good idea to try to resolver that pin.  You don't want it to break off in the board.  The power supplies seem to have about an 8-10 year life, so an 8 pin is in that life span for sure.  I would just replace it before it starts to give you problems down the road.  Just call your local ETC Dealer and they can get you one very quick.

     

Children
Related

www.etcconnect.com