• State Not Answered
  • Date
    tofio - Former HES Forum Member
  • Date
  • Replies 15 replies
  • Subscribers 6 subscribers
  • Views 1964 views
  • Users 0 members are here

HOG2PC : midi fader and wheel

Good evening everyone...
I hopelessly seek the syntax to be able to control the faders and the wheels in midi, because the handbook wholehogII is not very clear.
I want to control all that with a Novation SL25 (www.novationmusic.com/), all that is button it's ok, all which is not fader and wheels it's problem... If somebody can propose the syntax to me in the midimap.txt that has to use would be wonderful.
Thank's for your competences ;)

Christophe.
Parents
  • 0
    Dear Anders,

    It's OK !!! Thanks you very much !!!
    In fact, I had not removed 1 at all the parameters, I thought that the velocity did not function like the CC Then, I believed that the faders on the screen were to move! and when I put wysiwyg, that functioned.
    And for the line of order that you made me erased, I had bad information, it is rather simple in fact!

    I have a problem with the wheels, when I affect them on a encoder, I have very little resolution and it functions only about the middle of the course of the encoder. I can up or down the parameter well, but at a very small distance. I have tested with the lowval and highval of the encoder in my sl25 and with a parameter of wheel sensitivity in hog, but it's not this. If you have a new idea ...

    Thank's a lot for your precieuse assistance. ;)

    Christophe.
Reply
  • 0
    Dear Anders,

    It's OK !!! Thanks you very much !!!
    In fact, I had not removed 1 at all the parameters, I thought that the velocity did not function like the CC Then, I believed that the faders on the screen were to move! and when I put wysiwyg, that functioned.
    And for the line of order that you made me erased, I had bad information, it is rather simple in fact!

    I have a problem with the wheels, when I affect them on a encoder, I have very little resolution and it functions only about the middle of the course of the encoder. I can up or down the parameter well, but at a very small distance. I have tested with the lowval and highval of the encoder in my sl25 and with a parameter of wheel sensitivity in hog, but it's not this. If you have a new idea ...

    Thank's a lot for your precieuse assistance. ;)

    Christophe.
Children
No Data
Related

www.etcconnect.com