Hog500 Midi In issues

Im working on a permenant install for lighting a large painting that has a video triggering cues via SMPTE. I had the entire thing working via a hog pc which was replaced by a new hog 500. i got my show transfered over, but now im having trouble getting midi input.

Origionally i had an XLR coming out of my Sound board directly to a Hog PC Timecode widget. Now i have to send the signal via a midi jumper to interface with the hog 500. in order to convert the xlr to midi im using a PPS-2 www.jlcooper.com/pages/pps2.html. I thought i knew how i need to set that unit (MTC/READ), but im not recieving a signal and i've tried every combinations of settings on the pps2. I've tried setting the MIDI In setup panel on the how and still cant get any signal.

Now this is my first project involving timecode, so if anyone could shed some light on my situation, it would be most appreciated.
Parents
  • 0
    I just had the same Problem with HOG 1000 some days ago. I used a PPS 2 and did all the Setups I usually do when working with TC on HOG II. The TC-Controls showed me the TC properly but nothing happened, means my QLists did not react when the TC came along.

    When the TC-Generator jumped to another TC the TC-Controls kept on running the old TC.
Reply
  • 0
    I just had the same Problem with HOG 1000 some days ago. I used a PPS 2 and did all the Setups I usually do when working with TC on HOG II. The TC-Controls showed me the TC properly but nothing happened, means my QLists did not react when the TC came along.

    When the TC-Generator jumped to another TC the TC-Controls kept on running the old TC.
Children
No Data

www.etcconnect.com