Problem

Hello,

I am trying to load a show with a custom fixture profile that I created with wholehog2 library generator, the problem is that when I hit load show on the main loading screen it comes up with "unable to read functions resource file - if functions.txt has been modified the show may not load correctly. Continue with load?" I hit the check mark and "the file is incompatible with this version of the software. load has aborted"

What should I do? :dunce:

(btw I am completely new to the hog 2)
Parents
  • 0
    I could not find the list but in the handbook it say to put the manufacture at 99 if your unsure... I tried this and got back to where I started

    So if it helps I will post the code. maybe you can see something I don't know about.

    version = 40
    count = 1



    //-------------------------------------------------------
    fixture = Scanner
    manufacturer = 250
    product = 99
    name = Scanner 250
    yoke = no

    //These are the ones I own.

    output = dmx

    parameter = Gobo
    kind = b
    default = 0
    highlight = 0
    crossfade = 1
    movement = normal
    type = ltp8bit
    range = 0, 9, Shutter, noauto
    range = 10, 19, Open, noauto
    range = 20, 29, Globe, noauto
    range = 30, 39, 3x3 box, noauto
    range = 40, 49, spi cir, noauto
    range = 50, 59, tri cir, noauto
    range = 60, 69, star, noauto
    range = 70, 79, letters, noauto
    range = 80, 89, splots, noauto
    range = 90, 99, dots, noauto
    range = 100, 109, line, noauto
    range = 110, 119, 4 leaf, noauto
    range = 120, 129, dot cir, noauto
    range = 130, 139, unknown, noauto
    range = 140, 149, triangle, noauto
    range = 150, 159, rot s-f, noauto
    range = 209, 255, strobe, noauto

    parameter = Color
    kind = c
    default = 0
    highlight = 0
    crossfade = 0
    movement = normal
    type = ltp8bit
    range = 0, 9, shutter, noauto
    range = 10, 19, White, noauto
    range = 20, 29, Red, noauto
    range = 30, 39, Dk Green, noauto
    range = 40, 49, Yellow, noauto
    range = 50, 59, Green, noauto
    range = 60, 69, Orange, noauto
    range = 70, 79, Lt Blue, noauto
    range = 80, 89, Dk Blue, noauto
    range = 90, 99, Pink, noauto
    range = 100, 109, R W O, noauto
    range = 110, 119, Gren Yel, noauto
    range = 120, 129, B W G, noauto
    range = 130, 139, P W B, noauto
    range = 140, 149, Wh Gren, noauto
    range = 150, 159, 4 color, noauto
    range = 200, 255, 4 color, noauto

    parameter = Pan
    kind = f
    default = 0
    highlight = 0
    crossfade = 0
    movement = normal
    type = ltp8bit
    range = 0, 255, Pan, noauto

    parameter = Tilt
    kind = f
    default = 0
    highlight = 0
    crossfade = 0
    movement = normal
    type = ltp8bit
    range = 0, 255, Tilt, noauto



    Thank you so much for your help, I started to panic when my "new" board did not accept the profiles for my lights.
Reply
  • 0
    I could not find the list but in the handbook it say to put the manufacture at 99 if your unsure... I tried this and got back to where I started

    So if it helps I will post the code. maybe you can see something I don't know about.

    version = 40
    count = 1



    //-------------------------------------------------------
    fixture = Scanner
    manufacturer = 250
    product = 99
    name = Scanner 250
    yoke = no

    //These are the ones I own.

    output = dmx

    parameter = Gobo
    kind = b
    default = 0
    highlight = 0
    crossfade = 1
    movement = normal
    type = ltp8bit
    range = 0, 9, Shutter, noauto
    range = 10, 19, Open, noauto
    range = 20, 29, Globe, noauto
    range = 30, 39, 3x3 box, noauto
    range = 40, 49, spi cir, noauto
    range = 50, 59, tri cir, noauto
    range = 60, 69, star, noauto
    range = 70, 79, letters, noauto
    range = 80, 89, splots, noauto
    range = 90, 99, dots, noauto
    range = 100, 109, line, noauto
    range = 110, 119, 4 leaf, noauto
    range = 120, 129, dot cir, noauto
    range = 130, 139, unknown, noauto
    range = 140, 149, triangle, noauto
    range = 150, 159, rot s-f, noauto
    range = 209, 255, strobe, noauto

    parameter = Color
    kind = c
    default = 0
    highlight = 0
    crossfade = 0
    movement = normal
    type = ltp8bit
    range = 0, 9, shutter, noauto
    range = 10, 19, White, noauto
    range = 20, 29, Red, noauto
    range = 30, 39, Dk Green, noauto
    range = 40, 49, Yellow, noauto
    range = 50, 59, Green, noauto
    range = 60, 69, Orange, noauto
    range = 70, 79, Lt Blue, noauto
    range = 80, 89, Dk Blue, noauto
    range = 90, 99, Pink, noauto
    range = 100, 109, R W O, noauto
    range = 110, 119, Gren Yel, noauto
    range = 120, 129, B W G, noauto
    range = 130, 139, P W B, noauto
    range = 140, 149, Wh Gren, noauto
    range = 150, 159, 4 color, noauto
    range = 200, 255, 4 color, noauto

    parameter = Pan
    kind = f
    default = 0
    highlight = 0
    crossfade = 0
    movement = normal
    type = ltp8bit
    range = 0, 255, Pan, noauto

    parameter = Tilt
    kind = f
    default = 0
    highlight = 0
    crossfade = 0
    movement = normal
    type = ltp8bit
    range = 0, 255, Tilt, noauto



    Thank you so much for your help, I started to panic when my "new" board did not accept the profiles for my lights.
Children
No Data
Related

www.etcconnect.com