Link 2 hog2'sw/wings together

Does anyone know if it is possible to link 2-wholehog 2 w/wings together, so when you hit a cue on one board the other board would go to that cue. just in case the main board goes down the backup board would be in the right cue. Thanks
Parents
  • 0
    Yes,
    Use a midi cable between them.
    I believe pressing setup, then input panel will get you where you need.

    I am also sure you can find more on this in the manual or someone who has used a 2 more recently can detail this out a bit more for you.

    Good luck
Reply
  • 0
    Yes,
    Use a midi cable between them.
    I believe pressing setup, then input panel will get you where you need.

    I am also sure you can find more on this in the manual or someone who has used a 2 more recently can detail this out a bit more for you.

    Good luck
Children
No Data

www.etcconnect.com